| Chapter 1 Maintenance on X-Trek System helps
best performance
|
| PART A - To clean your X-Trek
Racer wheel mechanism |
| PART B - Maintenance on the
Track |
| |
| PART A - To
clean your X-Trek Racer wheel mechanism |
| Regular maintenance on your
X-Trek micro racer is important for best performance. Dirt and
dust stuck around rear wheel gear deteriorates X-Trek performance.
The following steps help you clean your X-Trek racer. |
| 1) take off the tire of rear wheel: |
ROLL OVER THE IMAGE TO ZOOM |
| 2) take off the wheel cover: |
ROLL OVER THE IMAGE TO ZOOM |
| 3) turn the screw anti-clockwise until you can loosen the wheel
out. |
ROLL OVER THE IMAGE TO ZOOM |
| 4) Use a brush to brush out all the dust and dirt from the gears
and the shaft; clean the whole assembly as much as you can. |
ROLL OVER THE IMAGE TO ZOOM |
| 5) Clean the tire with home use alcohol in order to get rid of
all kinds of dust and dirt. It is important as dust and dirt increase
the degree of slipperiness on slope track. Lose of climbing power
of X-Trek will likely result in. |
ROLL OVER THE IMAGE TO ZOOM |
| 6) Put back the wheel and secure the screw into position by turning
it clockwise; put back the wheel cover and tire into position respectively. |
| |
| 7) Repeat the same procedure for another rear wheel assembly. |
| |
Regularly cleaning on front wheel assembly
also helps your X-Trek racer have best performance although no
gear involves in front wheel mechanism. To follow the above procedure
can help clean the front wheel assembly too. |
| |
| PART B - Maintenance
on the Track |
| Cleaning on the track is also crucial. Again, reason behind is
very simple as dust and dirt increase the slipperiness on the track
and slope. Lose of climbing power of X-Trek racer will likely result
in. To clean the track system regularly with home use alcohol can
help solve the issue. |
| |
